Step-by-Step Approach to Recover Your Laview Camera Login

Step 1: Utilize the "Forgot Password" Link to Reset Your Password.

Open the Laview app or web portal.

Click on Forgot Password.

Enter the email address with which you registered.

Follow the instructions sent by the email for creating a new password.

Step 2: Reset from NVR/DVR Menu

If you have an NVR/DVR system, you should be able to reset this password straight from the main menu of the device.

Attach the monitor and mouse to your NVR/DVR.

At the login screen, click Forgot Password.

You will be asked either to answer some security questions or to scan a QR code to get a reset code from Laview support.

Step 3: Factory Reset Laview NVR (If the above fails)

If the password cannot be recovered by any of these means, then perform a factory reset Laview NVR:

Turn off the NVR.

Find the reset button inside the device (check the manual for its exact location).

Press and hold the button for 15 to 20 seconds.

Resetting the System and Rebooting

[Note:] The default process of reset will wipe all CPE setting from the device. After this, you must reconfigure your Laview Camera system.

Step 4: Laview Camera Setup After Reset

Switch on the Laview Camera and NVR.

Connect the camera to the network through Ethernet/Wi-Fi.

Start the Laview application and create an account.

Add your camera on the application by scanning its QR code.

Set the recording schedule, motion detection, and notifications.

Tips to Avoid Password Troubles in the Future

A secure password manager is the best place to store your login information.

A strong yet easy-for-you-to-remember password is what you should use.

Keep your Laview firmware updated for security.

By following these steps, you can quickly regain access to your Laview camera login and have your security system keep guarding your house without interruption.